|
|
|
Glass Bead CaneGlass beads are usually categorized by the method used to manipulate the glass. Most beads fall into three main categories: wound beads, drawn beads, and molded beads.Find handmade,ventian, and other types of glass beads used for jewellery and other craft work . |
||||||
Glass Bead work or Jewellery making |
|||||||
| "There are composites, such as millefiori beads, where cross-sections of a drawn glass cane are applied to a wound glass core. A very minor industry in blown glass beads also existed in 19th century Venice and France. Probably the earliest beads of true glass were made by the winding method. Glass at a temperature high enough to make it workable , or "ductile", is laid down or wound around a steel wire or mandrel coated in a clay slip called "bead release." The wound bead while still hot may be further shaped by manipulating with graphite, wood, stainless steel or marble tools and paddles, this process is called marvering, originating from the French word "Marver" which translates to "Marble". It can also be pressed into a mold in its molten state. While still hot, or after re-heating, the surface of the bead may be decorated with fine rods called stringers of colored glass. These are called lampwork beads" Lampwork BeadsA variant of the wound glass beadmaking technique, and a labor intensive one, is what is traditionally called lampworking. In the Venetian industry, where very large quantities of beads were produced in the 19th century for the African trade, the core of a decorated bead was produced from molten glass at furnace temperatures, a large-scale industrial process dominated by men. The delicate multicolored decoration was then added by people, mostly women, working at home using used an oil lamp or spirit lamp to re-heat the cores and the fine wisps of colored glass used to decorate them. These workers were paid on a piecework basis for the resulting lampwork beads. Modern lampwork beads are made by using a gas torch to heat a rod of glass and spinning the resulting thread around a metal rod covered in bead release. When the base bead has been formed, other colors of glass can be added to the surface to create many designs. After this initial stage of the beadmaking process, the bead can be further fired in a kiln to make it more durable.""Modern beadmakers use single or duel fuel torches, so `flameworked' is replacing the older term. Unlike a metalworking torch, or burner as some people in the trade prefer to call them, a flameworking torch is usually "surface mix"; that is, the oxygen and fuel (typically propane, though natural gas is also common) is mixed after it comes out of the torch, resulting in a quieter tool and less dirty flame. Also unlike metalworking, the torch is fixed, and the bead and glass move in the flame. American torches are usually mounted at about a 45 degree angle, a result of scientific glassblowing heritage; Japanese torches are recessed, and have flames coming straight up, like a large bunsen burner; Czech production torches tend to be positioned nearly horizontally"
Lampworked dichroic glass bead showing thin film application
Furnace glass beads
A variant of the wound glass beadmaking technique, and a labor intensive one, is what is traditionally called lampworking. In the Venetian industry, where very large quantities of beads were produced in the 19th century for the African trade, the core of a decorated bead was produced from molten glass at furnace temperatures, a large-scale industrial process dominated by men. The delicate multicolored decoration was then added by people, mostly women, working at home using used an oil lamp or spirit lamp to re-heat the cores and the fine wisps of colored glass used to decorate them. These workers were paid on a piecework basis for the resulting lampwork beads. Modern lampwork beads are made by using a gas torch to heat a rod of glass and spinning the resulting thread around a metal rod covered in bead release. When the base bead has been formed, other colors of glass can be added to the surface to create many designs. After this initial stage of the beadmaking process, the bead can be further fired in a kiln to make it more durable. Modern beadmakers use single or duel fuel torches, so `flameworked' is replacing the older term. Unlike a metalworking torch, or burner as some people in the trade prefer to call them, a flameworking torch is usually "surface mix"; that is, the oxygen and fuel (typically propane, though natural gas is also common) is mixed after it comes out of the torch, resulting in a quieter tool and less dirty flame. Also unlike metalworking, the torch is fixed, and the bead and glass move in the flame. American torches are usually mounted at about a 45 degree angle, a result of scientific glassblowing heritage; Japanese torches are recessed, and have flames coming straight up, like a large bunsen burner; Czech production torches tend to be positioned nearly horizontally"
|
|||||||
| 1. Jute Catalogs,Jute Catalog,Jute Product Catalogs,Jute Products Catalog,Catal... 2. http://www.marlowsauctions.co.uk/m2.html 3. Fancy Lampwork Beads - India Lampwork Beads - India Bead Mixes - Mixed India... 4. Hmxks |
|||||||